Conference Program
Download Conference Program in PDF
|
Tuesday - May 11, 2010 |
||||||
|
Hall A |
|
8:30 to 9:15 AM |
Opening Ceremony |
|||
|
Hall A |
The history of heat treatment |
9:15 to 10:00 AM |
Prof. H. W. Paxton (Special Invited Speaker) |
|||
|
|
10:00 to 10:50 AM |
Coffee Time |
||||
|
10:50 AM to 13:00 PM |
Session 1 |
|||||
|
Hall A |
Preparation, heat treatment and characterization of nanostructured and noncrystalline alloys |
10:50 to 11:20 AM |
Prof. C. Politis |
|||
|
Hall A |
Preparation and effects of heat treatment on magnetic properties of mixed oxide nanocomposites |
11:20 to 11:45 AM |
Dr. M. Gharagozlu |
|||
|
Hall B |
Heat treatment of an A356 aluminum cast alloy modified by Zr |
Mr. B. Baradarani |
||||
|
Hall A |
Heat treatment and particle grain size effect on the phase alteration of TiO2 nanoparticle |
11:45 AM to 12:10 PM |
Mr. M. Shayegani |
|||
|
Hall B |
Casting and study of effect of post deformation heat treatment parameters on the microstructure and mechanical properties of a low carbon 9Cr-1Mo steel |
Ms. M. Roozbahani |
||||
|
Hall A |
Effects of sintering temperature on grain growth, permeability and permittivity of Co0.2Ni0.3Zn0.5Fe2O4 material prepared using mechanically alloyed nanoparticles |
12:10 to 12:35 PM |
Dr. Samaila Bawa Waje |
|||
|
Hall B |
Effect of chemical composition on case depth of low alloy steels hardened by carburizing process |
Mr. S. R. Elmi Hoseini |
||||
|
Hall A |
The effect of heat treatment on mechanical properties of alumina-silicon carbide nanocomposite |
12:35 to 13:00 PM |
Mr. M. Mirfattah |
|||
|
Hall B |
The effect of long-term aging on the microstructural changes and mechanical properties of Incoloy 800 superalloy |
Dr. A. Ashrafi |
||||
|
|
13:00 to 14:30 PM |
Lunch Time |
||||
|
14:30 to 16:15 PM |
Session 2 |
|||||
|
Hall A |
Practical experience of a heat treatment shop |
14:30 to 15:00 PM |
Mr. M. Behboodi |
|||
|
Hall B |
On the application of eddy current nondestructive technique in mass production heat treatment |
Mr. S. Kahrobaei |
||||
|
Hall A |
Influence of heat treatment on the preparation of nano crystalline Sol Gel titania |
15:00 to 15:25 PM |
Prof. Zahira Yaakob |
|||
|
Hall B |
Influence of heat treatment on properties of AISI 316L SS coated with TiO2-Al2O3 nanocomposite thin films |
Mr. H. Vaghari |
||||
|
Hall A |
Effect of temperature on the photopyroelectric spectrum of the ceramic ZnO – MnO - Dy2O3 |
15:25 to 15:50 PM |
Prof. Zahid Rizwan |
|||
|
Hall B |
Effect of thermal treatment on the crystal structure, mechanical properties and corrosion behavior of zirconia-alumina nanocoatings |
Mr. E. Nouri |
||||
|
Hall A |
Effects of temperature on the particles size of NiCo ferrite nanoparticles synthesized by heat method |
15:50 to 16:15 PM |
Mr. M. G. Naseri |
|||
|
Hall B |
Electrical behavior of MnCo2O4 and CoCr2O4 spinel coatings during annealing in two types of oxidation tests |
Mr. H. Ebrahimifar |
||||
|
|
16:15 to 16:30 PM |
Coffee Time |
||||
|
16:30 to 17:45 PM |
Session 3 |
|||||
|
Hall A |
Influence of heat treatment in formation of martensitic structure in historical bronzes |
16:30 to 16:55 PM |
Mr. M. Mortazavi |
|||
|
Hall B |
Influence of heat treatment on activation of Al2O3 powders and mechanical properties of Al-Al2O3 composites |
Mr. M. Hoseinzadeh |
||||
|
Hall A |
Influence of training treatment cycles on shape memory and pseudoelasticity effects of Fe-14Mn-5Si-9Cr-5Ni alloy |
16:55 to 17:20 PM |
Mr. A. Akhondzadeh |
|||
|
Hall B |
An investigation on the effects of Ni, Mo, C and Cu addition on hardness, density and microstructural evolution in steel parts produced by powder metallurgy route |
Mr. A. Ghandi |
||||
|
Hall A |
The effect of aging treatment on two way shape memory effect generation in a Ni – reach NiTi alloy |
17:20 to 17:45 PM |
Mr. M. S. Shakeri |
|||
|
Hall B |
Achieving 50 HRC hardness straight from sintering followed by accelerated cooling in PM steel 5Cr, 1Mo, 2Cu, 1Si |
Mr. M. Mazaheri |
||||
|
Wednesday - May 12, 2010 |
||||||
|
Hall A |
|
8:30 to 8:40 AM |
Holy Koran |
|||
|
8:40 to 10:25 AM |
Session 1 |
|||||
|
Hall A |
Formation of intermetallic coatings by diffusion annealing |
8:40 to 9:10 AM |
Prof. S. F. Ashrafizadeh |
|||
|
Hall A |
Influence of heat treatment on wear properties of electroless nickel composite coatings |
9:10 to 9:35 AM |
Mr. M. Mohammadi |
|||
|
Hall B |
Microstructure-hardness relationship in quenched and partitioned medium-arbon steel |
Ms. N. Asadi |
||||
|
Hall A |
Evaluation of wear behavior of single and duplex boriding and chromizing coatings |
9:35 to 10:00 AM |
Mr. M. Kheyrodin |
|||
|
Hall B |
Effect of initial microstructure and cooling rate on the microstructure evolution and hardness of Ti-6Al-4V alloy |
Mr. S. Ahmadi |
||||
|
Hall A |
Properties of active screen plasma nitrided electroless Ni-B coatings |
10:00 to 10:25 AM |
Ms. D. Ahmadkhaniha |
|||
|
Hall B |
Investigation of microstructure and mechanical properties of 15Cr-4Ni martensitic stainless steel under various heat treatment procedures |
Mr. H. Keshmiri |
||||
|
|
10:25 to 11:00 AM |
Coffee Time |
||||
|
11:00 AM to 12:45 PM |
Session 2 |
|||||
|
Hall A |
Prospect of distance learning education in the heat treatment industry |
11:00 to 11:30 AM |
Dr. M. M. Hoseinioun |
|||
|
Hall B |
Effect of heat treatment on abrasive wear behavior of NiCrBSi coatings |
Mr. V. Ramezani |
||||
|
Hall A |
Effect of T5 post weld heat treatment variables on mechanical properties and microstructure of Al 7075 MIG weld |
11:30 to 11:55 AM |
Mr. H. Sabet |
|||
|
Hall B |
Effect of heat treatment on properties of electroless NiCoFe-B Coatings |
Mr. A. Azizi |
||||
|
Hall A |
The effect of laser cladding on the martensitic stainless steel with stellite6 |
11:55 AM to 12:20 PM |
Ms. M. Rabbanikhah |
|||
|
Hall B |
Study of the plasma nitriding of chromized AISI 1045 steel |
Ms. F. Hakami |
||||
|
Hall A |
Phase transformations prediction in heat treated affected zone of ARC welded SAE 4340 steel by dilatometer |
12:20 to 12:45 PM |
Mr. K. Jahadi |
|||
|
Hall B |
Computing volume fraction of retained austenite (γR) in austempered ductile irons (ADI) by means of artificial neural networks (ANN) models |
M. H. Pourasiabi |
||||
|
|
12:45 to 14:00 PM |
Lunch Time |
||||
|
14:00 to 15:45 PM |
Session 3 |
|||||
|
Hall A |
Influence of heat treatment upon in crease exploitation characteristics of gas-thermal coverings with boron heat diffusion process |
14:00 to 14:30 PM |
Prof. Izatullo Ganiev |
|||
|
Hall B |
Optimizing of heat treatment procedure of ball mills of Sarcheshme complex (using DOE) |
Mr. V. Javaheri |
||||
|
Hall A |
Effect of heat treatment on microstructure and mechanical properties of IN-718 TIG weld |
14:30 to 14:55 PM |
Mr. R. Shateri |
|||
|
Hall B |
Optimization of aging conditions of Al 6110 and Al 7075 using artificial neural network |
Ms. N. Kamkar |
||||
|
Hall A |
Effect of heat treatment on microstructure and mechanical properties of welded Ti6Al4V alloy |
14:55 to 15:20 PM |
Mr. S. Nazerian |
|||
|
Hall B |
Simulation of dimensional changes and heat transfer of martensitic transformation during hardening of steel cylinder |
Mr. M. Khorrami Rad |
||||
|
Hall A |
Studies on microstructure and mechanical behavior of as-weld and PWHT of 17-4 PH stainless steel GTA weld |
15:20 to 15:45 PM |
Mr. M. R. Tavakoli |
|||
|
Hall B |
Using artificial neural networks (ANN) for prediction of surface hardness of active screen plasma nitrided steel with complex geometry |
Ms. Z. Soltani Asadi |
||||
|
|
15:45 to 16:00 PM |
Coffee Time |
||||
|
Hall A |
|
16:00 to 17:15 PM |
Closing Ceremony |
|||